belt - logicalplanet https://www.logicalplanet.com making ideas, one layer at a time Thu, 12 Sep 2024 21:19:40 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.logicalplanet.com/wp-content/uploads/2024/02/cropped-LP240220e-5-512x512-Large-Favicon-100-32x32.jpg belt - logicalplanet https://www.logicalplanet.com 32 32 Belt Hanger https://www.logicalplanet.com/2024/09/12/belt_hanger/ https://www.logicalplanet.com/2024/09/12/belt_hanger/#respond Fri, 13 Sep 2024 05:15:00 +0000 https://www.logicalplanet.com/?p=2455 My wife recently requested a belt hanger similar to one she had seen online and here it is… A super simple but effective concept for getting your belts organized and out of the way in your closet. Print and use. Printing This product was designed for a 0.4mm nozzle, a 0.2mm layer height and the […]

The post Belt Hanger first appeared on logicalplanet.

]]> My wife recently requested a belt hanger similar to one she had seen online and here it is…

A super simple but effective concept for getting your belts organized and out of the way in your closet.

Print and use.

Printing

This product was designed for a 0.4mm nozzle, a 0.2mm layer height and the following settings:

Wall Line Count = 4 ( 4 x 0.4mm = 1.6mm walls )
Top and Bottom Layer Count = 5 ( 5 x 0.2mm = 1.0mm top and bottom )
Infill = 40%, Cubic
Ironing = OFF (not needed)
Support = No support required.
Material = PLA recommended (any material should work fine)
Print Orientation: As shown below.

Assembly Notes

No assembly or post-print processing is required.

The post Belt Hanger first appeared on logicalplanet.

]]> https://www.logicalplanet.com/2024/09/12/belt_hanger/feed/ 0