cable clasp - logicalplanet https://www.logicalplanet.com making ideas, one layer at a time Sun, 01 Feb 2026 19:01:26 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://www.logicalplanet.com/wp-content/uploads/2024/02/cropped-LP240220e-5-512x512-Large-Favicon-100-32x32.jpg cable clasp - logicalplanet https://www.logicalplanet.com 32 32 Lockable USB Cable Clasp Version 2.0 https://www.logicalplanet.com/2025/09/08/lockableusb2/ https://www.logicalplanet.com/2025/09/08/lockableusb2/#respond Mon, 08 Sep 2025 13:56:48 +0000 https://www.logicalplanet.com/?p=3643 I didn’t really need this design, but it always bothered me that my earlier version was so difficult to print – or, rather, the built-in support was so difficult to remove. So I made a complete redesign that does not require any support. Much better. Click here to download STL (Affiliate Link) 🔒 Lockable USB […]

The post Lockable USB Cable Clasp Version 2.0 first appeared on logicalplanet.

]]> I didn’t really need this design, but it always bothered me that my earlier version was so difficult to print – or, rather, the built-in support was so difficult to remove. So I made a complete redesign that does not require any support. Much better.

Click here to download STL (Affiliate Link)

🔒 Lockable USB Cable Clasp – Version 2.0

Keep your cables secure and organized with this print-in-place cable clasp.
Designed to hold up to 4 cables, it can be used with or without a lock for added security.

Key Features

  • 100% printed – no hardware required
  • Print-in-place design, ready to use right off the printer
  • Holds up to 4 cables neatly and securely
  • Optional lock or zip tie for extra protection

🛠 Instructions

  1. Lay in the cables
  2. Fold the inner clasp over to hold them in place
  3. Fold the outer clasp until it snaps closed
  4. (Optional) Add a lock or zip tie through the enclosure for extra security

Print & Slicer Settings

Functional designs (such as this one) generally require more strength than non-functional designs and more strength than the typical default slicer settings provide, so please review your slicer settings carefully.

This product was designed for a 0.4mm nozzle and a 0.2mm layer height. For best results, I suggest the following:

  • Material: PLA, PETG, or ABS
  • Nozzle: 0.4 mm
  • Layer Height: 0.2 mm
  • Walls: 4 (1.6 mm)
  • Top/Bottom: 5 (1.0 mm)
  • Infill: 40% Cubic (100% for maximum strength)
  • Detect Thin Walls: On
  • Wall Generator: Arachne
  • Brim/Raft: No
  • Support: None required
  • Print Orientation: As per STL/3MF files

Assembly Notes

No assembly required.

The post Lockable USB Cable Clasp Version 2.0 first appeared on logicalplanet.

]]> https://www.logicalplanet.com/2025/09/08/lockableusb2/feed/ 0