I have made two versions; a 3 bottle per layer version and a 2 bottle per layer version. The 3-bottle version requires a 300mm print bed, while the 2-bottle version can be printed on a 250mm bed.

These wine crates are made from only two parts; the fixed end walls and the folding side walls (you need two of each for each layer of the “crate”). These parts all snap together and then the completed structure folds to collapse for storage when not needed.

Printing

I have tried to make my main print settings visible on the Cura screenshot but in case they are difficult to read I have summarized them here…

Material: I choose to use PETG for its durability and flexibility.

My Setup:
Nozzle = 0.4mm

My Settings:
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%

Support:
No support needed.

Print Orientation: As shown in the screenshot(s).

Assembly Notes

The post Wine Stackers – Folding Stackable Wine Crate first appeared on logicalplanet.