purse - logicalplanet https://www.logicalplanet.com making ideas, one layer at a time Thu, 12 Sep 2024 21:18:28 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://www.logicalplanet.com/wp-content/uploads/2024/02/cropped-LP240220e-5-512x512-Large-Favicon-100-32x32.jpg purse - logicalplanet https://www.logicalplanet.com 32 32 Shoulder Bag Hanger https://www.logicalplanet.com/2024/09/12/bag_hanger/ https://www.logicalplanet.com/2024/09/12/bag_hanger/#respond Fri, 13 Sep 2024 05:30:00 +0000 https://www.logicalplanet.com/?p=2457 In the course of researching the belt hanger for my wife, I saw a shoulder bag hanger that I thought was interesting and a good solution for storing shoulder bags. This is my take on that… This shoulder bag hanger approximates the radius of the human shoulder to create a gentle way to hang bags […]

The post Shoulder Bag Hanger first appeared on logicalplanet.

]]> In the course of researching the belt hanger for my wife, I saw a shoulder bag hanger that I thought was interesting and a good solution for storing shoulder bags. This is my take on that…

This shoulder bag hanger approximates the radius of the human shoulder to create a gentle way to hang bags and keep them in their natural shape.

You can store multiple bags on a single hanger or cascade multiple hangers together to create more storage vertically.

Printing

This product was designed for a 0.4mm nozzle, a 0.2mm layer height and the following settings:

Wall Line Count = 4 ( 4 x 0.4mm = 1.6mm walls )
Top and Bottom Layer Count = 5 ( 5 x 0.2mm = 1.0mm top and bottom )
Infill = 40%, Cubic
Ironing = OFF (not needed)
Support = No support required
Material = PLA (any material should work fine)
Print Orientation: As shown below.

Assembly Notes

No assembly or post-print processing is required.

The post Shoulder Bag Hanger first appeared on logicalplanet.

]]> https://www.logicalplanet.com/2024/09/12/bag_hanger/feed/ 0