In the course of researching the belt hanger for my wife, I saw a shoulder bag hanger that I thought was interesting and a good solution for storing shoulder bags. This is my take on that…
This shoulder bag hanger approximates the radius of the human shoulder to create a gentle way to hang bags and keep them in their natural shape.
You can store multiple bags on a single hanger or cascade multiple hangers together to create more storage vertically.
Printing
This product was designed for a 0.4mm nozzle, a 0.2mm layer height and the following settings:
Wall Line Count = 4 ( 4 x 0.4mm = 1.6mm walls ) Top and Bottom Layer Count = 5 ( 5 x 0.2mm = 1.0mm top and bottom ) Infill = 40%, Cubic Ironing = OFF (not needed) Support = No support required Material = PLA (any material should work fine) Print Orientation: As shown below.
Some of my designs are only available for free for 1 week from when first posted, so please download them when you see a new file available that you are interested in. Also, please like and save the file too as it helps with my ratings.
I do not permit the use of my designs for commercial purposes (i.e. you can not sell my design(s) or products printed from my design(s)) without first acquiring a commercial license from me. On Thangs.com I offer membership accounts for access to all my design files as well as a membership for commercial licensing which allows subscribers to sell printed products using my designs.
I welcome comments and feedback as we as requests for customization of designs. I will do my best to accommodate those requests.
Leave a Reply