Fold-out Hooks for WallMatePlate

After creating the fold-out hooks for my ClampDock system, I realized this would be a good addition to the WallPlateMate system as well. So here it is…

It makes a really convenient accessory for hanging a wide range of things that you might otherwise not have a home for.

Each of the “hooks” flips in for storage and out for use. The larger hooks is suitable for garments, leashes, dog collars, umbrellas, etcetera. The smaller hook is ideal for keys. There is also a slide-out loop designed for hanging sunglasses or other eyewear.

The accessory snaps onto any of the WallPlateMate mounts.

Print Settings

Functional designs (such as this one) generally require more strength than non-functional designs and more strength than the typical default slicer settings provide, so please review your slicer settings carefully.

This product was designed for a 0.4mm nozzle and a 0.2mm layer height. For best results, I suggest the following:

• Material = PLA / PETG
• Nozzle = 0.4mm
• Layer Height = 0.2mm
• Line Width = 0.4mm
• Wall Count = 4 (1.6mm)
• Top and Bottom Layer Count = 5
• Detect Thin Walls = ON
• Wall Generator = Arachne
• Infill = 40% (Cubic)
• Support = Do not add, all required support is incorporated into the design.
• Print orientation = As per the STL/3MF files and the included image

Assembly Notes

There are two pieces of support that need to be removed post-printing. Once they are removed, you can snap the parts together as illustrated.