Category: 3d Printing
-
X1 Capture & Vent Exhaust with LEDs
After creating the earlier X1 exhaust and also the P1S exhaust I have learned a lot. And, that is all now compiled into this new X1 capture and vent exhaust extraction system. And, this system (like the P1S system) now includes facilities to add LED strips into the top of the machine to illuminate the…
-
PS1 Exhaust System
After creating an exhaust extraction system for my X1 last week, I had a request for one suitable for the Bambu Lab P1S. And, to create it with the ability to capture the exhaust pushed out the back fan. I learned that while the exhaust fan of the X1’s sucks air in, the exhaust fan…
-
X1 Exhaust System
If you have an X1 and want to extract air from the chamber here is a solution that you may be interested in. Rather than try to ride over the existing vent openings on the back of the machine, I have created a frame that sits on top of the machine (under the glass). It…
-
Count the Turns
…of filament on the spool to know how much filament remains. I guess a lot of people hate wasting the last little bit of filament on a spool as I do. But it is not super convenient to remove the spool from the machine to measure it just to determine you have 50g remaining. So…
-
LPE25 Variable Flow Valve
When I created the modular LPE25 Quick Connect Exhaust System I always thought I would make a blast gate for it at some point but was lacking inspiration. Then someone asked me for a variable flow valve and I thought… that would be so much better for this application. So here it is…
-
LPE25 Quick Connect Exhaust
This is a quick-connect/disconnect system for a 2.5-inch vacuum/exhaust hose that includes a mounting facility so you can keep it organized. I developed this to vent out my printers and it has worked out so well that I thought I better share it…
-
Re-useable Print Spool
I am thrilled that many of the filaments I like to use are now on recyclable cardboard spools but unfortunately, not all are. So I wanted a re-useable spool that was easy to use and had some features that were important to me. This is what I came up with.
-
Folding Garden Canopy
Living where we do, I have difficulty keeping some of my herbs (plants) alive through the winters. But I have found protecting them from the winter elements using a cover is extremely effective in getting them into the spring in good shape. So I created a folding canopy structure using 1/2 PVC pipe and a…
-
Quick Release Fan Duct For JG Aurora A5S)
This is one of those projects that I spent a ridiculous amount of time on and in the end really never finished it. The idea is fantastic though… snap on and off fan ducts for the hotted on a JG Aurora A3S or A5S. Not only does it make replacement quick and easy, but the…
-
Split Ring for Keys
I designed this just for fun but they work quite well also. I was interested in seeing how to print two components together without them bonding. I used a 0.2mm print layer and a 0.2mm gap between the two rings. They stick together but don’t fuse together and can be pried apart quite easily. Nozzle…
-
A3S Cable Chains
I designed this from the ground up as a learning exercise as much as anything else. And, honestly just because it seemed like a fun project. I had no cable chain experience before making this so I am not sure exactly how the chain is supposed to behave but I think this one works pretty…